> For the complete documentation index, see [llms.txt](https://utd-bv.gitbook.io/manual-shopify-theme-ultra/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://utd-bv.gitbook.io/manual-shopify-theme-ultra/ultra-sections/sections-and-snippets/specifications.md).

# Specifications

<figure><img src="https://content.gitbook.com/content/wp6wpeVynqvtz0WMVrUT/blobs/EOZ2ZtaLWx0MypaJ9YY1/Untitled%20(5).png" alt=""><figcaption></figcaption></figure>

## **Adding a Section**

In order to add a section, you need to go to:

**`Customizer`** → **`Add Section`** → **`Specifications`**.

<figure><img src="https://content.gitbook.com/content/wp6wpeVynqvtz0WMVrUT/blobs/ZIZIpBxz2OWJh0px3gXw/Untitled%20(6).png" alt=""><figcaption></figcaption></figure>

## **Section settings**

### General

<figure><img src="https://content.gitbook.com/content/wp6wpeVynqvtz0WMVrUT/blobs/PmENo23vAgLzS1wOOAUr/Untitled%20(7).png" alt=""><figcaption></figcaption></figure>

1. **`Heading`** - you can set a title for the section;
2. **`Product`** - you can select a product for the section;

### Layout

<figure><img src="https://content.gitbook.com/content/wp6wpeVynqvtz0WMVrUT/blobs/FJ7JIgqQAOBxi3f0IqhA/Untitled%20(8).png" alt=""><figcaption></figcaption></figure>

1. **`Container width`** - a container width of the section. If “Inherit” value is selected then container width based on the group 'Layout' settings in the Theme settings;
2. **`Desktop offset top`** - the **top** indent of the section on the **desktop**;
3. **`Desktop offset bottom`** - the **bottom** indent of the section on the **desktop**;
4. **`Mobile offset top`** - the **top** indent of the section on the **mobile**;
5. **`Mobile offset bottom`** - the **bottom** indent of the section on the **mobile**.

### **Blocks settings**

### Specifications

The block has settings, **label**, **values** with which you can specify up to 10 specifications

<figure><img src="https://content.gitbook.com/content/wp6wpeVynqvtz0WMVrUT/blobs/A7Hk9VxiP2vJUbQcX2hX/Untitled%20(9).png" alt=""><figcaption></figcaption></figure>

<figure><img src="https://content.gitbook.com/content/wp6wpeVynqvtz0WMVrUT/blobs/vrpCSzeBH616pba9Ugxe/Untitled%20(10).png" alt=""><figcaption></figcaption></figure>

<figure><img src="https://content.gitbook.com/content/wp6wpeVynqvtz0WMVrUT/blobs/Al3EtDGiQlgQoqY8Q2Z2/Untitled%20(11).png" alt=""><figcaption></figcaption></figure>

<figure><img src="https://content.gitbook.com/content/wp6wpeVynqvtz0WMVrUT/blobs/llwSTmw8hGM8DPNCiwwM/Untitled%20(12).png" alt=""><figcaption></figcaption></figure>

<figure><img src="https://content.gitbook.com/content/wp6wpeVynqvtz0WMVrUT/blobs/eJk5xlHWjrVIUR3ZUeoN/Untitled%20(13).png" alt=""><figcaption></figcaption></figure>

1. **`Label`** - you can specify a **label** for the specification;
2. **`Value`** - you can specify a **value** for the specification;