> For the complete documentation index, see [llms.txt](https://utd-bv.gitbook.io/manual-shopify-theme-ultra/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://utd-bv.gitbook.io/manual-shopify-theme-ultra/ultra-sections/sections-and-snippets/our-partners.md).

# Our Partners

<figure><img src="https://content.gitbook.com/content/wp6wpeVynqvtz0WMVrUT/blobs/oo6lXgUi0OdMORsxUP2f/Untitled%20(5).png" alt=""><figcaption></figcaption></figure>

<figure><img src="https://content.gitbook.com/content/wp6wpeVynqvtz0WMVrUT/blobs/xV2U2a8b8x4f87NR6umq/Untitled%20(6).png" alt=""><figcaption></figcaption></figure>

## **Adding a section**

In order to add a section, you need to go to **`Customizer`** → **`Add Section`** → **`Our Partners`**.

<figure><img src="https://content.gitbook.com/content/wp6wpeVynqvtz0WMVrUT/blobs/0pdjRbotmsXgT5CkMo0b/our-partners1.png" alt=""><figcaption></figcaption></figure>

## **Section settings**

### General

<figure><img src="https://content.gitbook.com/content/wp6wpeVynqvtz0WMVrUT/blobs/3zqwlN87fJN8LrlVsZI5/our-partners2.png" alt=""><figcaption></figcaption></figure>

1. **`Heading`** - the setting allows you to set the text for the title;
2. **`Type`** - the setting allows you to set type of the grid (**carousel or grid**).

### Layout

<figure><img src="https://content.gitbook.com/content/wp6wpeVynqvtz0WMVrUT/blobs/N6S2l2RmQrxzKDAUDrmT/Untitled%20(9).png" alt=""><figcaption></figcaption></figure>

1. **`Container width`** - a container width of the section. If the “Inherit” value is selected then the container width is based on the group 'Layout' settings in the Theme settings;
2. **`Desktop offset top`** - the **top** indent of the section on the **desktop**;
3. **`Desktop offset bottom`** - the **bottom** indent of the section on the **desktop**;
4. **`Mobile offset top`** - the **top** indent of the section on the **mobile**;
5. **`Mobile offset bottom`** - the **bottom** indent of the section on the **mobile**.

## Block settings

<figure><img src="https://content.gitbook.com/content/wp6wpeVynqvtz0WMVrUT/blobs/qXazPj2UJGs1Ipgdo2sC/Untitled%20(10).png" alt=""><figcaption></figcaption></figure>

1. **`Image`** - the setting allows you to set the image for the card;
2. **`Image link`** - the setting allows you to set the link for the card.